International
Paper Roll Clamps

Paper Roll Clamps

Print
Models 5-22 / 5-26 22 G/G-A
Models 5-22 / 5-26 22 G/G-A
Model

Capacity

Load
Centre
Roll
Range
Height

Weight

Centre of
Gravity
Centre of
Gravity
Effective
Thickness
Contact
Pads
Contact
Pad Gap
Mounting
Height
Mounting
Class
QBPADWHCGVCGLLM x NOHISO
kgmmmmmmkgmmmmmmmmmmmm2328
Single roll clamps - Unsplit long arm
5-2222G-13A2200650250-1300820710273.618280200220 x 3002001502 / 3 A
5-2222G-132200650500-1300820705273.618280200220 x 3002001502 / 3 A
5-2222G-14A1900725250-1450820730293.22205270458280200220 x 3002001502 / 3 A
5-2222G-141900725500-1450820725293.22205270458280200220 x 3002001502 / 3 A
5-2222G-15A1800760250-1520820740302.72759562842280200220 x 3002001502 / 3 A
5-2222G-151800760550-1520820735302.72759562842280200220 x 3002001502 / 3 A
5-2222G-16A1800800250-1600820770309.11473461843280200220 x 3002001502 / 3 A
5-2222G-161800800550-1600820765309.11473461843280200220 x 3002001502 / 3 A
1 - 2 roll clamps - Split long arm
5-2622G-13A2200650250-1300820700265.618280200220 x 3002001502 / 3 A
5-2622G-132200650500-1300820695265.618280200220 x 3002001502 / 3 A
5-2622G-14A1900725250-1450820720285.22205270458280200220 x 3002001502 / 3 A
5-2622G-141900725500-1450820715285.22205270458280200220 x 3002001502 / 3 A
5-2622G-15A1800760250-1520820730294.72759562842280200220 x 3002001502 / 3 A
5-2622G-151800760550-1520820725294.72759562842280200220 x 3002001502 / 3 A
5-2622G-16A1800800250-1600820760301.11473461843280200220 x 3002001502 / 3 A
5-2622G-161800800550-1600820755301.11473461843280200220 x 3002001502 / 3 A

Notes:

  • Two hydraulic functions required.
  • Adjustable pressure relief valve is included.
  • Short arm: adjustable at 45-degree rotation.
  • Models 5-xxxx-xx with fixed (non-moving) short arm.
  • Models 5-xxxx-xx-A with hydraulically positionable short arm.
  • See hydraulic specifications page for pressure and flow rate recommendations.
  • Standard contact pads: metal grain pattern with high-friction surface.
  • Minimum 3,5-degree forward tilt on lift mast is required for horizontal handling.

Options:

  • Special roll ranges.
  • Fixed (non-moving) short arm.
  • Contact pad options: steel-sprayed, rubber faced, polyurethane faced.